TS 2068 - RGR - Digital or Analog?
2 messages · 2008-01-04 → 2008-01-04 · Yahoo Group era · View archive on archive.org
Participants: Adam Trionfo, M. Emrah Oral
Preserved from the Timex/Sinclair 2068 Yahoo Group (2001–2019), which is no longer online. Text reproduced from the archive.org archive; email addresses masked.
Messages
1. TS 2068 - RGR - Digital or Analog?
Adam Trionfo · Fri, 4 Jan 2008 13:23:
I'm PRETTY sure that the signal for the TS 2068 that is on the edge connector is digital... but I just want to make sure. If it is digital, then I need to make a circuit (which is in the tech manual). If it is analog, then there is no need, because everything needed is already on the edge connector.
Adam
_________________________________________________________________
Make distant family not so distant with Windows Vista® + Windows Live™.
http://www.microsoft.com/windows/digitallife/keepintouch.mspx?ocid=TXT_TAGLM_CPC_VideoChat_distantfamily_012008
2. Re: [ts2068] TS 2068 - RGR - Digital or Analog?
M. Emrah Oral · Fri, 4 Jan 2008 15:08:
I am pretty sure it is digital too. I simply made a cable (I can send you a photo if you'd like to see it) using an edge connector socket I removed from a broken interface, soldered resistors in series to the RGB+Sync lines to bring down the %V signal, and fed the signal to my Sony TV with an RGB SCART socket. I am not sure whether the resistors did the trick or whether my TV is actually capable of accepting TTL RGB through SCART. The model number of the TV is Sony KV-C2161D (PAL/NTSC/SECAM) . I get a crystal clear picture from the 2068. I also took the audio signal from the 2068 and fed it to the TV using the audio pins in the scart socket.
----- Original Message ----
From: Adam Trionfo <[email]>
To: TS 2068 Yahoogroup <[email]>
Sent: Friday, January 4, 2008 11:23:49 PM
Subject: [ts2068] TS 2068 - RGR - Digital or Analog?
I'm PRETTY sure that the signal for the TS 2068 that is on the edge connector is digital... but I just want to make sure. If it is digital, then I need to make a circuit (which is in the tech manual). If it is analog, then there is no need, because everything needed is already on the edge connector.
Adam
_________________________________________________________________
Make distant family not so distant with Windows Vista® + Windows Live™.
http://www.microsoft.com/windows/digitallife/keepintouch.mspx?ocid=TXT_TAGLM_CPC_VideoChat_distantfamily_012008
Yahoo! Groups Links
____________________________________________________________________________________
Be a better friend, newshound, and
know-it-all with Yahoo! Mobile. Try it now. http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ