TS2068 twister boards
22 messages · 2010-02-27 → 2011-01-21 · Yahoo Group era · View archive on archive.org
Participants: zxbruno, Oscar Arthur Koepke, Mark Martin, Pete Plank, Richard Burt, Vsevolod, george.orr1, Al Hartman, marcel.racine22, zxspectrum128
Preserved from the Timex/Sinclair 2068 Yahoo Group (2001–2019), which is no longer online. Text reproduced from the archive.org archive; email addresses masked.
Messages
1. re: TS2068 twister boards
zxbruno · Sat, 27 Feb 2010 08:29
I'm pleased to say there are a few brand new twister boards ready for sale, but the demand is already proving to be more than expected! I'm not the maker of the twister boards but I'm helping create a list of those interested in buying one. Initially the price would be set at $20 (maybe less) plus shipping costs. The schematic is also being shared once again (I did it last year) for those who prefer to make their own. The author wishes to remain anonymous at this time.
For now I leave you some pictures to see:
http://img.photobucket.com/albums/v400/zxspectrum/twisterboard/TwisterBoards2010run.jpg
http://img.photobucket.com/albums/v400/zxspectrum/twisterboard/DivIDE_on_TS2068_1of2.jpg
http://img.photobucket.com/albums/v400/zxspectrum/twisterboard/DivIDE_on_TS2068_2of2.jpg
http://img.photobucket.com/albums/v400/zxspectrum/twisterboard/TwisterBoard_schem.jpg
Regards,
Bruno
2. Re: [ts2068] re: TS2068 twister boards
Mark Martin · Sat, 27 Feb 2010 12:16
How do I get one -- where and how do I send money? :)
Thanks,
Mark
On Sat, Feb 27, 2010 at 2:29 AM, zxbruno <[email]> wrote:
>
>
> I'm pleased to say there are a few brand new twister boards ready for sale,
> but the demand is already proving to be more than expected! I'm not the
> maker of the twister boards but I'm helping create a list of those
> interested in buying one. Initially the price would be set at $20 (maybe
> less) plus shipping costs. The schematic is also being shared once again (I
> did it last year) for those who prefer to make their own. The author wishes
> to remain anonymous at this time.
>
> For now I leave you some pictures to see:
>
>
> http://img.photobucket.com/albums/v400/zxspectrum/twisterboard/TwisterBoards2010run.jpg
>
>
> http://img.photobucket.com/albums/v400/zxspectrum/twisterboard/DivIDE_on_TS2068_1of2.jpg
>
>
> http://img.photobucket.com/albums/v400/zxspectrum/twisterboard/DivIDE_on_TS2068_2of2.jpg
>
>
> http://img.photobucket.com/albums/v400/zxspectrum/twisterboard/TwisterBoard_schem.jpg
>
> Regards,
>
> Bruno
>
>
>
3. Re: [ts2068] Re: TS2068 twister boards
Mark Martin · Sat, 27 Feb 2010 18:38
On Sat, Feb 27, 2010 at 5:00 PM, zxbruno <[email]> wrote:
>
>
> Hi Mark. There were only 7 available and more than 7 people already
> contacted me, so I'm afraid there's none left for now. i say 'for now'
> because I've asked the maker if he could do more and I'm now waiting for his
> reply. I already added your name to the list of those interested and will
> let everyone know what happens next.
>
Sounds good, thanks.
>
>
> --- In [email] <ts2068%40yahoogroups.com>, Mark Martin
> <storycrafter@...> wrote:
> >
> > How do I get one -- where and how do I send money? :)
> >
> > Thanks,
> > Mark
> >
> > On Sat, Feb 27, 2010 at 2:29 AM, zxbruno <zxspectrum128@...> wrote:
> >
> > >
> > >
> > > I'm pleased to say there are a few brand new twister boards ready for
> sale,
> > > but the demand is already proving to be more than expected! I'm not the
> > > maker of the twister boards but I'm helping create a list of those
> > > interested in buying one. Initially the price would be set at $20
> (maybe
> > > less) plus shipping costs. The schematic is also being shared once
> again (I
> > > did it last year) for those who prefer to make their own. The author
> wishes
> > > to remain anonymous at this time.
> > >
> > > For now I leave you some pictures to see:
> > >
> > >
> > >
> http://img.photobucket.com/albums/v400/zxspectrum/twisterboard/TwisterBoards2010run.jpg
> > >
> > >
> > >
> http://img.photobucket.com/albums/v400/zxspectrum/twisterboard/DivIDE_on_TS2068_1of2.jpg
> > >
> > >
> > >
> http://img.photobucket.com/albums/v400/zxspectrum/twisterboard/DivIDE_on_TS2068_2of2.jpg
> > >
> > >
> > >
> http://img.photobucket.com/albums/v400/zxspectrum/twisterboard/TwisterBoard_schem.jpg
> > >
> > > Regards,
> > >
> > > Bruno
> > >
> > >
> > >
> >
>
>
>
4. Re: TS2068 twister boards
zxbruno · Sat, 27 Feb 2010 23:00
Hi Mark. There were only 7 available and more than 7 people already contacted me, so I'm afraid there's none left for now. i say 'for now' because I've asked the maker if he could do more and I'm now waiting for his reply. I already added your name to the list of those interested and will let everyone know what happens next.
--- In [email], Mark Martin <storycrafter@...> wrote:
>
> How do I get one -- where and how do I send money? :)
>
> Thanks,
> Mark
>
> On Sat, Feb 27, 2010 at 2:29 AM, zxbruno <zxspectrum128@...> wrote:
>
> >
> >
> > I'm pleased to say there are a few brand new twister boards ready for sale,
> > but the demand is already proving to be more than expected! I'm not the
> > maker of the twister boards but I'm helping create a list of those
> > interested in buying one. Initially the price would be set at $20 (maybe
> > less) plus shipping costs. The schematic is also being shared once again (I
> > did it last year) for those who prefer to make their own. The author wishes
> > to remain anonymous at this time.
> >
> > For now I leave you some pictures to see:
> >
> >
> > http://img.photobucket.com/albums/v400/zxspectrum/twisterboard/TwisterBoards2010run.jpg
> >
> >
> > http://img.photobucket.com/albums/v400/zxspectrum/twisterboard/DivIDE_on_TS2068_1of2.jpg
> >
> >
> > http://img.photobucket.com/albums/v400/zxspectrum/twisterboard/DivIDE_on_TS2068_2of2.jpg
> >
> >
> > http://img.photobucket.com/albums/v400/zxspectrum/twisterboard/TwisterBoard_schem.jpg
> >
> > Regards,
> >
> > Bruno
> >
> >
> >
>
5. Re: [ts2068] Re: TS2068 twister boards
Oscar Arthur Koepke · Sun, 28 Feb 2010 19:02
Put me on that list also.
Oscar from Brazil
--- On Sat, 2/27/10, Mark Martin <[email]> wrote:
From: Mark Martin <[email]>
Subject: Re: [ts2068] Re: TS2068 twister boards
To: [email]
Date: Saturday, February 27, 2010, 9:38 PM
On Sat, Feb 27, 2010 at 5:00 PM, zxbruno <zxspectrum128@ gmail.com> wrote:
Hi Mark. There were only 7 available and more than 7 people already contacted me, so I'm afraid there's none left for now. i say 'for now' because I've asked the maker if he could do more and I'm now waiting for his reply. I already added your name to the list of those interested and will let everyone know what happens next.
Sounds good, thanks.
--- In ts2068@yahoogroups. com, Mark Martin <storycrafter@ ...> wrote:
>
> How do I get one -- where and how do I send money? :)
>
> Thanks,
> Mark
>
> On Sat, Feb 27, 2010 at 2:29 AM, zxbruno <zxspectrum128@ ...> wrote:
>
> >
> >
> > I'm pleased to say there are a few brand new twister boards ready for sale,
> > but the demand is already proving to be more than expected! I'm not the
> > maker of the twister boards but I'm helping create a list of those
> > interested in buying one. Initially the price would be set at $20 (maybe
> > less) plus shipping costs. The schematic is also being shared once again (I
> > did it last year) for those who prefer to make their own. The author wishes
> > to remain anonymous at this time.
> >
> > For now I leave you some pictures to see:
> >
> >
> > http://img.photobuc ket.com/albums/ v400/zxspectrum/ twisterboard/ TwisterBoards201 0run.jpg
> >
> >
> > http://img.photobuc ket.com/albums/ v400/zxspectrum/ twisterboard/ DivIDE_on_ TS2068_1of2. jpg
> >
> >
> > http://img.photobuc ket.com/albums/ v400/zxspectrum/ twisterboard/ DivIDE_on_ TS2068_2of2. jpg
> >
> >
> > http://img.photobuc ket.com/albums/ v400/zxspectrum/ twisterboard/ TwisterBoard_ schem.jpg
> >
> > Regards,
> >
> > Bruno
> >
> >
> >
>
6. Re: [ts2068] Re: TS2068 twister boards
Pete Plank · Sun, 28 Feb 2010 19:12
I'd be interested as well.
Pete Plank
On Feb 27, 2010, at 3:00 PM, zxbruno wrote:
> Hi Mark. There were only 7 available and more than 7 people already contacted me, so I'm afraid there's none left for now. i say 'for now' because I've asked the maker if he could do more and I'm now waiting for his reply. I already added your name to the list of those interested and will let everyone know what happens next.
>
> --- In [email], Mark Martin <storycrafter@...> wrote:
> >
> > How do I get one -- where and how do I send money? :)
> >
> > Thanks,
> > Mark
> >
> > On Sat, Feb 27, 2010 at 2:29 AM, zxbruno <zxspectrum128@...> wrote:
> >
> > >
> > >
> > > I'm pleased to say there are a few brand new twister boards ready for sale,
> > > but the demand is already proving to be more than expected! I'm not the
> > > maker of the twister boards but I'm helping create a list of those
> > > interested in buying one. Initially the price would be set at $20 (maybe
> > > less) plus shipping costs. The schematic is also being shared once again (I
> > > did it last year) for those who prefer to make their own. The author wishes
> > > to remain anonymous at this time.
> > >
> > > For now I leave you some pictures to see:
> > >
> > >
> > > http://img.photobucket.com/albums/v400/zxspectrum/twisterboard/TwisterBoards2010run.jpg
> > >
> > >
> > > http://img.photobucket.com/albums/v400/zxspectrum/twisterboard/DivIDE_on_TS2068_1of2.jpg
> > >
> > >
> > > http://img.photobucket.com/albums/v400/zxspectrum/twisterboard/DivIDE_on_TS2068_2of2.jpg
> > >
> > >
> > > http://img.photobucket.com/albums/v400/zxspectrum/twisterboard/TwisterBoard_schem.jpg
> > >
> > > Regards,
> > >
> > > Bruno
> > >
> > >
> > >
> >
>
>
7. Re: TS2068 twister boards
zxbruno · Mon, 01 Mar 2010 07:47
Done and done. I'll keep adding people to the list but until I hear from the author I won't have any update.
--- In [email], Pete Plank <neko@...> wrote:
>
> I'd be interested as well.
>
> Pete Plank
>
> On Feb 27, 2010, at 3:00 PM, zxbruno wrote:
>
> > Hi Mark. There were only 7 available and more than 7 people already contacted me, so I'm afraid there's none left for now. i say 'for now' because I've asked the maker if he could do more and I'm now waiting for his reply. I already added your name to the list of those interested and will let everyone know what happens next.
> >
> > --- In [email], Mark Martin <storycrafter@> wrote:
> > >
> > > How do I get one -- where and how do I send money? :)
> > >
> > > Thanks,
> > > Mark
> > >
> > > On Sat, Feb 27, 2010 at 2:29 AM, zxbruno <zxspectrum128@> wrote:
> > >
> > > >
> > > >
> > > > I'm pleased to say there are a few brand new twister boards ready for sale,
> > > > but the demand is already proving to be more than expected! I'm not the
> > > > maker of the twister boards but I'm helping create a list of those
> > > > interested in buying one. Initially the price would be set at $20 (maybe
> > > > less) plus shipping costs. The schematic is also being shared once again (I
> > > > did it last year) for those who prefer to make their own. The author wishes
> > > > to remain anonymous at this time.
> > > >
> > > > For now I leave you some pictures to see:
> > > >
> > > >
> > > > http://img.photobucket.com/albums/v400/zxspectrum/twisterboard/TwisterBoards2010run.jpg
> > > >
> > > >
> > > > http://img.photobucket.com/albums/v400/zxspectrum/twisterboard/DivIDE_on_TS2068_1of2.jpg
> > > >
> > > >
> > > > http://img.photobucket.com/albums/v400/zxspectrum/twisterboard/DivIDE_on_TS2068_2of2.jpg
> > > >
> > > >
> > > > http://img.photobucket.com/albums/v400/zxspectrum/twisterboard/TwisterBoard_schem.jpg
> > > >
> > > > Regards,
> > > >
> > > > Bruno
> > > >
> > > >
> > > >
> > >
> >
> >
>
8. Re: TS2068 twister boards
zxbruno · Wed, 03 Mar 2010 05:00
The author has agreed to make more boards. This will take a while, but I can see 2010 will be a good year for TS2068 users. :D
As long as we have your enthusiasm we'll keep exploring more options. I'm just managing things, but all credit should go to the gentleman who's doing this on his own free time. Without him none of this would be possible.
--- In [email], "zxbruno" <zxspectrum128@...> wrote:
>
> Done and done. I'll keep adding people to the list but until I hear from the author I won't have any update.
>
> --- In [email], Pete Plank <neko@> wrote:
> >
> > I'd be interested as well.
> >
> > Pete Plank
> >
> > On Feb 27, 2010, at 3:00 PM, zxbruno wrote:
> >
> > > Hi Mark. There were only 7 available and more than 7 people already contacted me, so I'm afraid there's none left for now. i say 'for now' because I've asked the maker if he could do more and I'm now waiting for his reply. I already added your name to the list of those interested and will let everyone know what happens next.
> > >
> > > --- In [email], Mark Martin <storycrafter@> wrote:
> > > >
> > > > How do I get one -- where and how do I send money? :)
> > > >
> > > > Thanks,
> > > > Mark
> > > >
> > > > On Sat, Feb 27, 2010 at 2:29 AM, zxbruno <zxspectrum128@> wrote:
> > > >
> > > > >
> > > > >
> > > > > I'm pleased to say there are a few brand new twister boards ready for sale,
> > > > > but the demand is already proving to be more than expected! I'm not the
> > > > > maker of the twister boards but I'm helping create a list of those
> > > > > interested in buying one. Initially the price would be set at $20 (maybe
> > > > > less) plus shipping costs. The schematic is also being shared once again (I
> > > > > did it last year) for those who prefer to make their own. The author wishes
> > > > > to remain anonymous at this time.
> > > > >
> > > > > For now I leave you some pictures to see:
> > > > >
> > > > >
> > > > > http://img.photobucket.com/albums/v400/zxspectrum/twisterboard/TwisterBoards2010run.jpg
> > > > >
> > > > >
> > > > > http://img.photobucket.com/albums/v400/zxspectrum/twisterboard/DivIDE_on_TS2068_1of2.jpg
> > > > >
> > > > >
> > > > > http://img.photobucket.com/albums/v400/zxspectrum/twisterboard/DivIDE_on_TS2068_2of2.jpg
> > > > >
> > > > >
> > > > > http://img.photobucket.com/albums/v400/zxspectrum/twisterboard/TwisterBoard_schem.jpg
> > > > >
> > > > > Regards,
> > > > >
> > > > > Bruno
> > > > >
> > > > >
> > > > >
> > > >
> > >
> > >
> >
>
9. Re: TS2068 twister boards
zxbruno · Sat, 06 Mar 2010 04:04
Ok, we have a go for more twister boards! We're going to try to have another 20 made, but 6 of them will be for the people who already contacted me when we were "out of stock". Soon I'll be e-mailing the first group of people to talk about payment, shipping, address where to ship to, etc. I'll make sure everyone stays updated.
--- In [email], "zxbruno" <zxspectrum128@...> wrote:
>
> Done and done. I'll keep adding people to the list but until I hear from the author I won't have any update.
>
> --- In [email], Pete Plank <neko@> wrote:
> >
> > I'd be interested as well.
> >
> > Pete Plank
> >
> > On Feb 27, 2010, at 3:00 PM, zxbruno wrote:
> >
> > > Hi Mark. There were only 7 available and more than 7 people already contacted me, so I'm afraid there's none left for now. i say 'for now' because I've asked the maker if he could do more and I'm now waiting for his reply. I already added your name to the list of those interested and will let everyone know what happens next.
> > >
> > > --- In [email], Mark Martin <storycrafter@> wrote:
> > > >
> > > > How do I get one -- where and how do I send money? :)
> > > >
> > > > Thanks,
> > > > Mark
> > > >
> > > > On Sat, Feb 27, 2010 at 2:29 AM, zxbruno <zxspectrum128@> wrote:
> > > >
> > > > >
> > > > >
> > > > > I'm pleased to say there are a few brand new twister boards ready for sale,
> > > > > but the demand is already proving to be more than expected! I'm not the
> > > > > maker of the twister boards but I'm helping create a list of those
> > > > > interested in buying one. Initially the price would be set at $20 (maybe
> > > > > less) plus shipping costs. The schematic is also being shared once again (I
> > > > > did it last year) for those who prefer to make their own. The author wishes
> > > > > to remain anonymous at this time.
> > > > >
> > > > > For now I leave you some pictures to see:
> > > > >
> > > > >
> > > > > http://img.photobucket.com/albums/v400/zxspectrum/twisterboard/TwisterBoards2010run.jpg
> > > > >
> > > > >
> > > > > http://img.photobucket.com/albums/v400/zxspectrum/twisterboard/DivIDE_on_TS2068_1of2.jpg
> > > > >
> > > > >
> > > > > http://img.photobucket.com/albums/v400/zxspectrum/twisterboard/DivIDE_on_TS2068_2of2.jpg
> > > > >
> > > > >
> > > > > http://img.photobucket.com/albums/v400/zxspectrum/twisterboard/TwisterBoard_schem.jpg
> > > > >
> > > > > Regards,
> > > > >
> > > > > Bruno
> > > > >
> > > > >
> > > > >
> > > >
> > >
> > >
> >
>
10. Re: [ts2068] Re: TS2068 twister boards
Richard Burt · Sat, 6 Mar 2010 12:31:
I am interested in the twister board. Which country is the board coming from? Thanks.
Richard
--- On Fri, 3/5/10, zxbruno <[email]> wrote:
From: zxbruno <[email]>
Subject: [ts2068] Re: TS2068 twister boards
To: [email]
Received: Friday, March 5, 2010, 11:04 PM
Ok, we have a go for more twister boards! We're going to try to have another 20 made, but 6 of them will be for the people who already contacted me when we were "out of stock". Soon I'll be e-mailing the first group of people to talk about payment, shipping, address where to ship to, etc. I'll make sure everyone stays updated.
--- In ts2068@yahoogroups. com, "zxbruno" <zxspectrum128@ ...> wrote:
>
> Done and done. I'll keep adding people to the list but until I hear from the author I won't have any update.
>
> --- In ts2068@yahoogroups. com, Pete Plank <neko@> wrote:
> >
> > I'd be interested as well.
> >
> > Pete Plank
> >
> > On Feb 27, 2010, at 3:00 PM, zxbruno wrote:
> >
> > > Hi Mark. There were only 7 available and more than 7 people already contacted me, so I'm afraid there's none left for now. i say 'for now' because I've asked the maker if he could do more and I'm now waiting for his reply. I already added your name to the list of those interested and will let everyone know what happens next.
> > >
> > > --- In ts2068@yahoogroups. com, Mark Martin <storycrafter@ > wrote:
> > > >
> > > > How do I get one -- where and how do I send money? :)
> > > >
> > > > Thanks,
> > > > Mark
> > > >
> > > > On Sat, Feb 27, 2010 at 2:29 AM, zxbruno <zxspectrum128@ > wrote:
> > > >
> > > > >
> > > > >
> > > > > I'm pleased to say there are a few brand new twister boards ready for sale,
> > > > > but the demand is already proving to be more than expected! I'm not the
> > > > > maker of the twister boards but I'm helping create a list of those
> > > > > interested in buying one. Initially the price would be set at $20 (maybe
> > > > > less) plus shipping costs. The schematic is also being shared once again (I
> > > > > did it last year) for those who prefer to make their own. The author wishes
> > > > > to remain anonymous at this time.
> > > > >
> > > > > For now I leave you some pictures to see:
> > > > >
> > > > >
> > > > > http://img.photobuc ket.com/albums/ v400/zxspectrum/ twisterboard/ TwisterBoards201 0run.jpg
> > > > >
> > > > >
> > > > > http://img.photobuc ket.com/albums/ v400/zxspectrum/ twisterboard/ DivIDE_on_ TS2068_1of2. jpg
> > > > >
> > > > >
> > > > > http://img.photobuc ket.com/albums/ v400/zxspectrum/ twisterboard/ DivIDE_on_ TS2068_2of2. jpg
> > > > >
> > > > >
> > > > > http://img.photobuc ket.com/albums/ v400/zxspectrum/ twisterboard/ TwisterBoard_ schem.jpg
> > > > >
> > > > > Regards,
> > > > >
> > > > > Bruno
> > > > >
> > > > >
> > > > >
> > > >
> > >
> > >
> >
>
__________________________________________________________________
Yahoo! Canada Toolbar: Search from anywhere on the web, and bookmark your favourite sites. Download it now
http://ca.toolbar.yahoo.com.
11. Re: TS2068 twister boards
zxbruno · Sun, 07 Mar 2010 07:38
Hi Richard. The boards are made right here in the U.S. and shipped from California.
I've added your name to the list.
--- In [email], Richard Burt <rjburt56@...> wrote:
>
> I am interested in the twister board.  Which country is the board coming from? Thanks.
> Â
> Richard
>
>
> --- On Fri, 3/5/10, zxbruno <zxspectrum128@...> wrote:
>
>
> From: zxbruno <zxspectrum128@...>
> Subject: [ts2068] Re: TS2068 twister boards
> To: [email]
> Received: Friday, March 5, 2010, 11:04 PM
>
>
> Â
>
>
>
> Ok, we have a go for more twister boards! We're going to try to have another 20 made, but 6 of them will be for the people who already contacted me when we were "out of stock". Soon I'll be e-mailing the first group of people to talk about payment, shipping, address where to ship to, etc. I'll make sure everyone stays updated.
>
> --- In ts2068@yahoogroups. com, "zxbruno" <zxspectrum128@ ...> wrote:
> >
> > Done and done. I'll keep adding people to the list but until I hear from the author I won't have any update.
> >
> > --- In ts2068@yahoogroups. com, Pete Plank <neko@> wrote:
> > >
> > > I'd be interested as well.
> > >
> > > Pete Plank
> > >
> > > On Feb 27, 2010, at 3:00 PM, zxbruno wrote:
> > >
> > > > Hi Mark. There were only 7 available and more than 7 people already contacted me, so I'm afraid there's none left for now. i say 'for now' because I've asked the maker if he could do more and I'm now waiting for his reply. I already added your name to the list of those interested and will let everyone know what happens next.
> > > >
> > > > --- In ts2068@yahoogroups. com, Mark Martin <storycrafter@ > wrote:
> > > > >
> > > > > How do I get one -- where and how do I send money? :)
> > > > >
> > > > > Thanks,
> > > > > Mark
> > > > >
> > > > > On Sat, Feb 27, 2010 at 2:29 AM, zxbruno <zxspectrum128@ > wrote:
> > > > >
> > > > > >
> > > > > >
> > > > > > I'm pleased to say there are a few brand new twister boards ready for sale,
> > > > > > but the demand is already proving to be more than expected! I'm not the
> > > > > > maker of the twister boards but I'm helping create a list of those
> > > > > > interested in buying one. Initially the price would be set at $20 (maybe
> > > > > > less) plus shipping costs. The schematic is also being shared once again (I
> > > > > > did it last year) for those who prefer to make their own. The author wishes
> > > > > > to remain anonymous at this time.
> > > > > >
> > > > > > For now I leave you some pictures to see:
> > > > > >
> > > > > >
> > > > > > http://img.photobuc ket.com/albums/ v400/zxspectrum/ twisterboard/ TwisterBoards201 0run.jpg
> > > > > >
> > > > > >
> > > > > > http://img.photobuc ket.com/albums/ v400/zxspectrum/ twisterboard/ DivIDE_on_ TS2068_1of2. jpg
> > > > > >
> > > > > >
> > > > > > http://img.photobuc ket.com/albums/ v400/zxspectrum/ twisterboard/ DivIDE_on_ TS2068_2of2. jpg
> > > > > >
> > > > > >
> > > > > > http://img.photobuc ket.com/albums/ v400/zxspectrum/ twisterboard/ TwisterBoard_ schem.jpg
> > > > > >
> > > > > > Regards,
> > > > > >
> > > > > > Bruno
> > > > > >
> > > > > >
> > > > > >
> > > > >
> > > >
> > > >
> > >
> >
>
>
>
>
>
>
>
>
>
> __________________________________________________________________
> Yahoo! Canada Toolbar: Search from anywhere on the web, and bookmark your favourite sites. Download it now
> http://ca.toolbar.yahoo.com.
>
12. Re: TS2068 twister boards
zxbruno · Sun, 21 Mar 2010 02:45
The boards are being sent to me. Once I have the first batch I'll contact those who gave me their contact information.
--- In [email], "zxbruno" <zxspectrum128@...> wrote:
>
> Hi Richard. The boards are made right here in the U.S. and shipped from California.
>
> I've added your name to the list.
>
> --- In [email], Richard Burt <rjburt56@> wrote:
> >
> > I am interested in the twister board.  Which country is the board coming from? Thanks.
> > Â
> > Richard
> >
> >
> > --- On Fri, 3/5/10, zxbruno <zxspectrum128@> wrote:
> >
> >
> > From: zxbruno <zxspectrum128@>
> > Subject: [ts2068] Re: TS2068 twister boards
> > To: [email]
> > Received: Friday, March 5, 2010, 11:04 PM
> >
> >
> > Â
> >
> >
> >
> > Ok, we have a go for more twister boards! We're going to try to have another 20 made, but 6 of them will be for the people who already contacted me when we were "out of stock". Soon I'll be e-mailing the first group of people to talk about payment, shipping, address where to ship to, etc. I'll make sure everyone stays updated.
> >
> > --- In ts2068@yahoogroups. com, "zxbruno" <zxspectrum128@ ...> wrote:
> > >
> > > Done and done. I'll keep adding people to the list but until I hear from the author I won't have any update.
> > >
> > > --- In ts2068@yahoogroups. com, Pete Plank <neko@> wrote:
> > > >
> > > > I'd be interested as well.
> > > >
> > > > Pete Plank
> > > >
> > > > On Feb 27, 2010, at 3:00 PM, zxbruno wrote:
> > > >
> > > > > Hi Mark. There were only 7 available and more than 7 people already contacted me, so I'm afraid there's none left for now. i say 'for now' because I've asked the maker if he could do more and I'm now waiting for his reply. I already added your name to the list of those interested and will let everyone know what happens next.
> > > > >
> > > > > --- In ts2068@yahoogroups. com, Mark Martin <storycrafter@ > wrote:
> > > > > >
> > > > > > How do I get one -- where and how do I send money? :)
> > > > > >
> > > > > > Thanks,
> > > > > > Mark
> > > > > >
> > > > > > On Sat, Feb 27, 2010 at 2:29 AM, zxbruno <zxspectrum128@ > wrote:
> > > > > >
> > > > > > >
> > > > > > >
> > > > > > > I'm pleased to say there are a few brand new twister boards ready for sale,
> > > > > > > but the demand is already proving to be more than expected! I'm not the
> > > > > > > maker of the twister boards but I'm helping create a list of those
> > > > > > > interested in buying one. Initially the price would be set at $20 (maybe
> > > > > > > less) plus shipping costs. The schematic is also being shared once again (I
> > > > > > > did it last year) for those who prefer to make their own. The author wishes
> > > > > > > to remain anonymous at this time.
> > > > > > >
> > > > > > > For now I leave you some pictures to see:
> > > > > > >
> > > > > > >
> > > > > > > http://img.photobuc ket.com/albums/ v400/zxspectrum/ twisterboard/ TwisterBoards201 0run.jpg
> > > > > > >
> > > > > > >
> > > > > > > http://img.photobuc ket.com/albums/ v400/zxspectrum/ twisterboard/ DivIDE_on_ TS2068_1of2. jpg
> > > > > > >
> > > > > > >
> > > > > > > http://img.photobuc ket.com/albums/ v400/zxspectrum/ twisterboard/ DivIDE_on_ TS2068_2of2. jpg
> > > > > > >
> > > > > > >
> > > > > > > http://img.photobuc ket.com/albums/ v400/zxspectrum/ twisterboard/ TwisterBoard_ schem.jpg
> > > > > > >
> > > > > > > Regards,
> > > > > > >
> > > > > > > Bruno
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > >
> > > > >
> > > > >
> > > >
> > >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> > __________________________________________________________________
> > Yahoo! Canada Toolbar: Search from anywhere on the web, and bookmark your favourite sites. Download it now
> > http://ca.toolbar.yahoo.com.
> >
>
13. Re: [ts2068] Re: TS2068 twister boards
Oscar Arthur Koepke · Mon, 22 Mar 2010 08:24
Don't forget me please...Thanks
Oscar
--- On Sat, 3/20/10, zxbruno <[email]> wrote:
From: zxbruno <[email]>
Subject: [ts2068] Re: TS2068 twister boards
To: [email]
Date: Saturday, March 20, 2010, 11:45 PM
The boards are being sent to me. Once I have the first batch I'll contact those who gave me their contact information.
--- In ts2068@yahoogroups. com, "zxbruno" <zxspectrum128@ ...> wrote:
>
> Hi Richard. The boards are made right here in the U.S. and shipped from California.
>
> I've added your name to the list.
>
> --- In ts2068@yahoogroups. com, Richard Burt <rjburt56@> wrote:
> >
> > I am interested in the twister board.  Which country is the board coming from? Thanks.
> > Â
> > Richard
> >
> >
> > --- On Fri, 3/5/10, zxbruno <zxspectrum128@ > wrote:
> >
> >
> > From: zxbruno <zxspectrum128@ >
> > Subject: [ts2068] Re: TS2068 twister boards
> > To: ts2068@yahoogroups. com
> > Received: Friday, March 5, 2010, 11:04 PM
> >
> >
> > Â
> >
> >
> >
> > Ok, we have a go for more twister boards! We're going to try to have another 20 made, but 6 of them will be for the people who already contacted me when we were "out of stock". Soon I'll be e-mailing the first group of people to talk about payment, shipping, address where to ship to, etc. I'll make sure everyone stays updated.
> >
> > --- In ts2068@yahoogroups. com, "zxbruno" <zxspectrum128@ ...> wrote:
> > >
> > > Done and done. I'll keep adding people to the list but until I hear from the author I won't have any update.
> > >
> > > --- In ts2068@yahoogroups. com, Pete Plank <neko@> wrote:
> > > >
> > > > I'd be interested as well.
> > > >
> > > > Pete Plank
> > > >
> > > > On Feb 27, 2010, at 3:00 PM, zxbruno wrote:
> > > >
> > > > > Hi Mark. There were only 7 available and more than 7 people already contacted me, so I'm afraid there's none left for now. i say 'for now' because I've asked the maker if he could do more and I'm now waiting for his reply. I already added your name to the list of those interested and will let everyone know what happens next.
> > > > >
> > > > > --- In ts2068@yahoogroups. com, Mark Martin <storycrafter@ > wrote:
> > > > > >
> > > > > > How do I get one -- where and how do I send money? :)
> > > > > >
> > > > > > Thanks,
> > > > > > Mark
> > > > > >
> > > > > > On Sat, Feb 27, 2010 at 2:29 AM, zxbruno <zxspectrum128@ > wrote:
> > > > > >
> > > > > > >
> > > > > > >
> > > > > > > I'm pleased to say there are a few brand new twister boards ready for sale,
> > > > > > > but the demand is already proving to be more than expected! I'm not the
> > > > > > > maker of the twister boards but I'm helping create a list of those
> > > > > > > interested in buying one. Initially the price would be set at $20 (maybe
> > > > > > > less) plus shipping costs. The schematic is also being shared once again (I
> > > > > > > did it last year) for those who prefer to make their own. The author wishes
> > > > > > > to remain anonymous at this time.
> > > > > > >
> > > > > > > For now I leave you some pictures to see:
> > > > > > >
> > > > > > >
> > > > > > > http://img.photobuc ket.com/albums/ v400/zxspectrum/ twisterboard/ TwisterBoards201 0run.jpg
> > > > > > >
> > > > > > >
> > > > > > > http://img.photobuc ket.com/albums/ v400/zxspectrum/ twisterboard/ DivIDE_on_ TS2068_1of2. jpg
> > > > > > >
> > > > > > >
> > > > > > > http://img.photobuc ket.com/albums/ v400/zxspectrum/ twisterboard/ DivIDE_on_ TS2068_2of2. jpg
> > > > > > >
> > > > > > >
> > > > > > > http://img.photobuc ket.com/albums/ v400/zxspectrum/ twisterboard/ TwisterBoard_ schem.jpg
> > > > > > >
> > > > > > > Regards,
> > > > > > >
> > > > > > > Bruno
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > >
> > > > >
> > > > >
> > > >
> > >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> > ____________ _________ _________ _________ _________ _________ _
> > Yahoo! Canada Toolbar: Search from anywhere on the web, and bookmark your favourite sites. Download it now
> > http://ca.toolbar. yahoo.com.
> >
>
14. Re: TS2068 twister boards
Vsevolod · Mon, 29 Mar 2010 20:32
Count me in! How do I pay?
Thanks
--- In [email], "zxbruno" <zxspectrum128@...> wrote:
>
> I'm pleased to say there are a few brand new twister boards ready for sale, but the demand is already proving to be more than expected! I'm not the maker of the twister boards but I'm helping create a list of those interested in buying one. Initially the price would be set at $20 (maybe less) plus shipping costs. The schematic is also being shared once again (I did it last year) for those who prefer to make their own. The author wishes to remain anonymous at this time.
>
> For now I leave you some pictures to see:
>
> http://img.photobucket.com/albums/v400/zxspectrum/twisterboard/TwisterBoards2010run.jpg
>
> http://img.photobucket.com/albums/v400/zxspectrum/twisterboard/DivIDE_on_TS2068_1of2.jpg
>
> http://img.photobucket.com/albums/v400/zxspectrum/twisterboard/DivIDE_on_TS2068_2of2.jpg
>
> http://img.photobucket.com/albums/v400/zxspectrum/twisterboard/TwisterBoard_schem.jpg
>
> Regards,
>
> Bruno
>
15. Re: TS2068 twister boards
george.orr1 · Mon, 05 Apr 2010 00:44
I would like to be on the twister board list. I find these groups difficult to use. Will my request be found. Will I find the answer if I get an answer? [email] (alias George Orr)
--- In [email], Oscar Arthur Koepke <oscarkoepke@...> wrote:
>
> Don't forget me please...Thanks
>
> Oscar
>
> --- On Sat, 3/20/10, zxbruno <zxspectrum128@...> wrote:
>
> From: zxbruno <zxspectrum128@...>
> Subject: [ts2068] Re: TS2068 twister boards
> To: [email]
> Date: Saturday, March 20, 2010, 11:45 PM
>
>
>
>
>
>
>
> Â
>
>
>
>
>
>
>
>
>
> The boards are being sent to me. Once I have the first batch I'll contact those who gave me their contact information.
>
>
>
> --- In ts2068@yahoogroups. com, "zxbruno" <zxspectrum128@ ...> wrote:
>
> >
>
> > Hi Richard. The boards are made right here in the U.S. and shipped from California.
>
> >
>
> > I've added your name to the list.
>
> >
>
> > --- In ts2068@yahoogroups. com, Richard Burt <rjburt56@> wrote:
>
> > >
>
> > > I am interested in the twister board.ÃÂ ÃÂ Which country is the board coming from?ÃÂ Thanks.
>
> > > ÃÂ
>
> > > Richard
>
> > >
>
> > >
>
> > > --- On Fri, 3/5/10, zxbruno <zxspectrum128@ > wrote:
>
> > >
>
> > >
>
> > > From: zxbruno <zxspectrum128@ >
>
> > > Subject: [ts2068] Re: TS2068 twister boards
>
> > > To: ts2068@yahoogroups. com
>
> > > Received: Friday, March 5, 2010, 11:04 PM
>
> > >
>
> > >
>
> > > ÃÂ
>
> > >
>
> > >
>
> > >
>
> > > Ok, we have a go for more twister boards! We're going to try to have another 20 made, but 6 of them will be for the people who already contacted me when we were "out of stock". Soon I'll be e-mailing the first group of people to talk about payment, shipping, address where to ship to, etc. I'll make sure everyone stays updated.
>
> > >
>
> > > --- In ts2068@yahoogroups. com, "zxbruno" <zxspectrum128@ ...> wrote:
>
> > > >
>
> > > > Done and done. I'll keep adding people to the list but until I hear from the author I won't have any update.
>
> > > >
>
> > > > --- In ts2068@yahoogroups. com, Pete Plank <neko@> wrote:
>
> > > > >
>
> > > > > I'd be interested as well.
>
> > > > >
>
> > > > > Pete Plank
>
> > > > >
>
> > > > > On Feb 27, 2010, at 3:00 PM, zxbruno wrote:
>
> > > > >
>
> > > > > > Hi Mark. There were only 7 available and more than 7 people already contacted me, so I'm afraid there's none left for now. i say 'for now' because I've asked the maker if he could do more and I'm now waiting for his reply. I already added your name to the list of those interested and will let everyone know what happens next.
>
> > > > > >
>
> > > > > > --- In ts2068@yahoogroups. com, Mark Martin <storycrafter@ > wrote:
>
> > > > > > >
>
> > > > > > > How do I get one -- where and how do I send money? :)
>
> > > > > > >
>
> > > > > > > Thanks,
>
> > > > > > > Mark
>
> > > > > > >
>
> > > > > > > On Sat, Feb 27, 2010 at 2:29 AM, zxbruno <zxspectrum128@ > wrote:
>
> > > > > > >
>
> > > > > > > >
>
> > > > > > > >
>
> > > > > > > > I'm pleased to say there are a few brand new twister boards ready for sale,
>
> > > > > > > > but the demand is already proving to be more than expected! I'm not the
>
> > > > > > > > maker of the twister boards but I'm helping create a list of those
>
> > > > > > > > interested in buying one. Initially the price would be set at $20 (maybe
>
> > > > > > > > less) plus shipping costs. The schematic is also being shared once again (I
>
> > > > > > > > did it last year) for those who prefer to make their own. The author wishes
>
> > > > > > > > to remain anonymous at this time.
>
> > > > > > > >
>
> > > > > > > > For now I leave you some pictures to see:
>
> > > > > > > >
>
> > > > > > > >
>
> > > > > > > > http://img.photobuc ket.com/albums/ v400/zxspectrum/ twisterboard/ TwisterBoards201 0run.jpg
>
> > > > > > > >
>
> > > > > > > >
>
> > > > > > > > http://img.photobuc ket.com/albums/ v400/zxspectrum/ twisterboard/ DivIDE_on_ TS2068_1of2. jpg
>
> > > > > > > >
>
> > > > > > > >
>
> > > > > > > > http://img.photobuc ket.com/albums/ v400/zxspectrum/ twisterboard/ DivIDE_on_ TS2068_2of2. jpg
>
> > > > > > > >
>
> > > > > > > >
>
> > > > > > > > http://img.photobuc ket.com/albums/ v400/zxspectrum/ twisterboard/ TwisterBoard_ schem.jpg
>
> > > > > > > >
>
> > > > > > > > Regards,
>
> > > > > > > >
>
> > > > > > > > Bruno
>
> > > > > > > >
>
> > > > > > > >
>
> > > > > > > >
>
> > > > > > >
>
> > > > > >
>
> > > > > >
>
> > > > >
>
> > > >
>
> > >
>
> > >
>
> > >
>
> > >
>
> > >
>
> > >
>
> > >
>
> > >
>
> > >
>
> > > ____________ _________ _________ _________ _________ _________ _
>
> > > Yahoo! Canada Toolbar: Search from anywhere on the web, and bookmark your favourite sites. Download it now
>
> > > http://ca.toolbar. yahoo.com.
>
> > >
>
> >
>
16. Re: [ts2068] Re: TS2068 twister boards
Oscar Arthur Koepke · Mon, 5 Apr 2010 09:41:
I was the first to make the request of a new 'twister board' and I'm just waithing for the production....
What seems to be the problem with these group? ??!
Until today, for me, these group from yahoo always worked fine!
The answer is always a reply...find it i very easy!(almost too easy)
Oscar
(Brazil)
--- On Sun, 4/4/10, george.orr1 <[email]> wrote:
From: george.orr1 <[email]>
Subject: [ts2068] Re: TS2068 twister boards
To: [email]
Date: Sunday, April 4, 2010, 9:44 PM
I would like to be on the twister board list. I find these groups difficult to use. Will my request be found. Will I find the answer if I get an answer? brucez@woodworths. com (alias George Orr)
--- In ts2068@yahoogroups. com, Oscar Arthur Koepke <oscarkoepke@ ...> wrote:
>
> Don't forget me please...Thanks
>
> Oscar
>
> --- On Sat, 3/20/10, zxbruno <zxspectrum128@ ...> wrote:
>
> From: zxbruno <zxspectrum128@ ...>
> Subject: [ts2068] Re: TS2068 twister boards
> To: ts2068@yahoogroups. com
> Date: Saturday, March 20, 2010, 11:45 PM
>
>
>
>
>
>
>
> Â
>
>
>
>
>
>
>
>
>
> The boards are being sent to me. Once I have the first batch I'll contact those who gave me their contact information.
>
>
>
> --- In ts2068@yahoogroups. com, "zxbruno" <zxspectrum128@ ...> wrote:
>
> >
>
> > Hi Richard. The boards are made right here in the U.S. and shipped from California.
>
> >
>
> > I've added your name to the list.
>
> >
>
> > --- In ts2068@yahoogroups. com, Richard Burt <rjburt56@> wrote:
>
> > >
>
> > > I am interested in the twister board.  Which country is the board coming from? Thanks.
>
> > > ÂÂ
>
> > > Richard
>
> > >
>
> > >
>
> > > --- On Fri, 3/5/10, zxbruno <zxspectrum128@ > wrote:
>
> > >
>
> > >
>
> > > From: zxbruno <zxspectrum128@ >
>
> > > Subject: [ts2068] Re: TS2068 twister boards
>
> > > To: ts2068@yahoogroups. com
>
> > > Received: Friday, March 5, 2010, 11:04 PM
>
> > >
>
> > >
>
> > > ÂÂ
>
> > >
>
> > >
>
> > >
>
> > > Ok, we have a go for more twister boards! We're going to try to have another 20 made, but 6 of them will be for the people who already contacted me when we were "out of stock". Soon I'll be e-mailing the first group of people to talk about payment, shipping, address where to ship to, etc. I'll make sure everyone stays updated.
>
> > >
>
> > > --- In ts2068@yahoogroups. com, "zxbruno" <zxspectrum128@ ...> wrote:
>
> > > >
>
> > > > Done and done. I'll keep adding people to the list but until I hear from the author I won't have any update.
>
> > > >
>
> > > > --- In ts2068@yahoogroups. com, Pete Plank <neko@> wrote:
>
> > > > >
>
> > > > > I'd be interested as well.
>
> > > > >
>
> > > > > Pete Plank
>
> > > > >
>
> > > > > On Feb 27, 2010, at 3:00 PM, zxbruno wrote:
>
> > > > >
>
> > > > > > Hi Mark. There were only 7 available and more than 7 people already contacted me, so I'm afraid there's none left for now. i say 'for now' because I've asked the maker if he could do more and I'm now waiting for his reply. I already added your name to the list of those interested and will let everyone know what happens next.
>
> > > > > >
>
> > > > > > --- In ts2068@yahoogroups. com, Mark Martin <storycrafter@ > wrote:
>
> > > > > > >
>
> > > > > > > How do I get one -- where and how do I send money? :)
>
> > > > > > >
>
> > > > > > > Thanks,
>
> > > > > > > Mark
>
> > > > > > >
>
> > > > > > > On Sat, Feb 27, 2010 at 2:29 AM, zxbruno <zxspectrum128@ > wrote:
>
> > > > > > >
>
> > > > > > > >
>
> > > > > > > >
>
> > > > > > > > I'm pleased to say there are a few brand new twister boards ready for sale,
>
> > > > > > > > but the demand is already proving to be more than expected! I'm not the
>
> > > > > > > > maker of the twister boards but I'm helping create a list of those
>
> > > > > > > > interested in buying one. Initially the price would be set at $20 (maybe
>
> > > > > > > > less) plus shipping costs. The schematic is also being shared once again (I
>
> > > > > > > > did it last year) for those who prefer to make their own. The author wishes
>
> > > > > > > > to remain anonymous at this time.
>
> > > > > > > >
>
> > > > > > > > For now I leave you some pictures to see:
>
> > > > > > > >
>
> > > > > > > >
>
> > > > > > > > http://img.photobuc ket.com/albums/ v400/zxspectrum/ twisterboard/ TwisterBoards201 0run.jpg
>
> > > > > > > >
>
> > > > > > > >
>
> > > > > > > > http://img.photobuc ket.com/albums/ v400/zxspectrum/ twisterboard/ DivIDE_on_ TS2068_1of2. jpg
>
> > > > > > > >
>
> > > > > > > >
>
> > > > > > > > http://img.photobuc ket.com/albums/ v400/zxspectrum/ twisterboard/ DivIDE_on_ TS2068_2of2. jpg
>
> > > > > > > >
>
> > > > > > > >
>
> > > > > > > > http://img.photobuc ket.com/albums/ v400/zxspectrum/ twisterboard/ TwisterBoard_ schem.jpg
>
> > > > > > > >
>
> > > > > > > > Regards,
>
> > > > > > > >
>
> > > > > > > > Bruno
>
> > > > > > > >
>
> > > > > > > >
>
> > > > > > > >
>
> > > > > > >
>
> > > > > >
>
> > > > > >
>
> > > > >
>
> > > >
>
> > >
>
> > >
>
> > >
>
> > >
>
> > >
>
> > >
>
> > >
>
> > >
>
> > >
>
> > > ____________ _________ _________ _________ _________ _________ _
>
> > > Yahoo! Canada Toolbar: Search from anywhere on the web, and bookmark your favourite sites. Download it now
>
> > > http://ca.toolbar. yahoo.com.
>
> > >
>
> >
>
17. Re: TS2068 twister boards
Al Hartman · Tue, 06 Apr 2010 09:43
You have to give Bruno time. He has to get all the boards from the maker before he can send them out.
He said so.
He has taken on a task for little or no profit to himself. So, it would be kind to cut him some slack as he gets everything together.
Al
18. Re: TS2068 twister boards
zxbruno · Tue, 06 Apr 2010 12:59
For now you don't have to pay anything. I'm waiting for the boards to arrive and once they do I'll contact everyone on my lists. The first list is for those who requested one when a small batch was made. The second list was a new one that I started because demand was more than expected. Please e-mail me your full name and mailing address and I'll be in touch once I have news.
--- In [email], "Vsevolod" <vbtinfo@...> wrote:
>
> Count me in! How do I pay?
>
> Thanks
>
> --- In [email], "zxbruno" <zxspectrum128@> wrote:
> >
> > I'm pleased to say there are a few brand new twister boards ready for sale, but the demand is already proving to be more than expected! I'm not the maker of the twister boards but I'm helping create a list of those interested in buying one. Initially the price would be set at $20 (maybe less) plus shipping costs. The schematic is also being shared once again (I did it last year) for those who prefer to make their own. The author wishes to remain anonymous at this time.
> >
> > For now I leave you some pictures to see:
> >
> > http://img.photobucket.com/albums/v400/zxspectrum/twisterboard/TwisterBoards2010run.jpg
> >
> > http://img.photobucket.com/albums/v400/zxspectrum/twisterboard/DivIDE_on_TS2068_1of2.jpg
> >
> > http://img.photobucket.com/albums/v400/zxspectrum/twisterboard/DivIDE_on_TS2068_2of2.jpg
> >
> > http://img.photobucket.com/albums/v400/zxspectrum/twisterboard/TwisterBoard_schem.jpg
> >
> > Regards,
> >
> > Bruno
> >
>
19. Re: TS2068 twister boards
zxbruno · Tue, 06 Apr 2010 13:05
Hi there. Yes, you answer will be found. I know what you mean when you say the group it's difficult to use. It takes a while to get used to it, but if you bookmark the group in your browser and always sort the messages by date everything will become easier, believe me. Also, when you open a message and the amount of replies confuses you, click to expand all messages and you'll see them posted by date. This will also makes "catching-up" easier. Finally, the reason why most replies quote the previous reply it's because the usage is similar to that of newsgroups, where quoted text helps readers keep track of a conversation. Remember, some users don't read all the messages in Yahoo. Some of them prefer to receive just e-mails with each message, or one "digest" e-mail every time there are new topics. I hope that helps a little bit.
To add your name of the list of people interested in twister boards, please e-mail me your name and mailing address and I'll be in touch. [email]
--- In [email], "george.orr1" <george.orr1@...> wrote:
>
>
> I would like to be on the twister board list. I find these groups difficult to use. Will my request be found. Will I find the answer if I get an answer? brucez@... (alias George Orr)
20. Re: TS2068 twister boards
zxbruno · Tue, 06 Apr 2010 13:11
I can't forget anyone, because the names are on my list. :)
Don't worry. I did this before when I organized a group order for K-Mouse Turbo interfaces from Velesoft. Once I have news I'll contact everyone on my list.
--- In [email], Oscar Arthur Koepke <oscarkoepke@...> wrote:
>
> Don't forget me please...Thanks
>
> Oscar
21. Re: TS2068 twister boards
marcel.racine22 · Thu, 20 Jan 2011 17:45
I did not follow all the emails but ... still some boards available ???
I would like to buy one !
Marcel
--- In [email], "zxbruno" <zxspectrum128@...> wrote:
>
> I'm pleased to say there are a few brand new twister boards ready for sale, but the demand is already proving to be more than expected! I'm not the maker of the twister boards but I'm helping create a list of those interested in buying one. Initially the price would be set at $20 (maybe less) plus shipping costs. The schematic is also being shared once again (I did it last year) for those who prefer to make their own. The author wishes to remain anonymous at this time.
>
> For now I leave you some pictures to see:
>
> http://img.photobucket.com/albums/v400/zxspectrum/twisterboard/TwisterBoards2010run.jpg
>
> http://img.photobucket.com/albums/v400/zxspectrum/twisterboard/DivIDE_on_TS2068_1of2.jpg
>
> http://img.photobucket.com/albums/v400/zxspectrum/twisterboard/DivIDE_on_TS2068_2of2.jpg
>
> http://img.photobucket.com/albums/v400/zxspectrum/twisterboard/TwisterBoard_schem.jpg
>
> Regards,
>
> Bruno
>
22. Re: TS2068 twister boards
zxspectrum128 · Fri, 21 Jan 2011 21:16
Hi Marcel. The first batch was completed and all buyers received it some time ago. The maker of these boards has been busy and the second batch isn't ready yet. This is also the reason why I don't ask for payments in advance. As soon as I have news I will email everyone on the 2nd batch list. I will add you to the list of those interested and will stay in touch.
--- In [email], "marcel.racine22" <marcel.racine22@...> wrote:
>
> I did not follow all the emails but ... still some boards available ???
>
> I would like to buy one !
>
> Marcel
> --- In [email], "zxbruno" <zxspectrum128@> wrote:
> >
> > I'm pleased to say there are a few brand new twister boards ready for sale, but the demand is already proving to be more than expected! I'm not the maker of the twister boards but I'm helping create a list of those interested in buying one. Initially the price would be set at $20 (maybe less) plus shipping costs. The schematic is also being shared once again (I did it last year) for those who prefer to make their own. The author wishes to remain anonymous at this time.
> >
> > For now I leave you some pictures to see:
> >
> > http://img.photobucket.com/albums/v400/zxspectrum/twisterboard/TwisterBoards2010run.jpg
> >
> > http://img.photobucket.com/albums/v400/zxspectrum/twisterboard/DivIDE_on_TS2068_1of2.jpg
> >
> > http://img.photobucket.com/albums/v400/zxspectrum/twisterboard/DivIDE_on_TS2068_2of2.jpg
> >
> > http://img.photobucket.com/albums/v400/zxspectrum/twisterboard/TwisterBoard_schem.jpg
> >
> > Regards,
> >
> > Bruno
> >
>